Best Sump Pump Repair Cost Estimates In The Twin Cities Metro

To ensure your sump pump is functioning properly, here are a few simple checks you can make:

• Check the Exterior Drain Pipe: Make sure it’s free of debris and properly directing water away from your foundation.
• Listen for the Motor: Ensure the motor is running when the pump is in use.
• Test with Water: Pour a bucket of water into the sump pit. The pump should trigger and quickly drain the water. If it doesn’t, it’s time to call Bonfe for a professional diagnostic.

If your pump doesn’t start or the pit doesn’t empty, don’t hesitate to call us—we’re here to help.

Sump pumps typically fail because they are overworked. If your basement experiences heavy flooding, an older pump may struggle to handle the amount of water. Over time, this can lead to pump malfunction or failure.

To prevent your sump pump from failing, follow these helpful tips:

1. Keep the Pit Clean: Make sure your sump pit is clear of debris that could block the pump’s intake. A buildup of dirt, stones, or other debris can prevent your pump from operating properly.
   
2. Test Your Sump Pump: Periodically, test your sump pump by pouring water into the pit. This ensures that it activates properly and drains water efficiently. If it doesn’t turn on, call Bonfe to have it inspected.

3. Check the Power Supply: Ensure your sump pump is plugged directly into a power outlet, not an extension cord. Extension cords can provide insufficient power, which can lead to pump failure.

4. Install a Backup System: Consider installing a backup sump pump or a battery-powered backup. This will give you peace of mind in case of a power outage or if your primary pump fails.

5. Ensure Proper Sizing: Make sure your sump pump is correctly sized for your home and its water needs. A pump that’s too small for your home may struggle to keep up with heavy water levels, especially during storms.

6. Address Problems Early: If you notice your sump pump making unusual sounds, running constantly, or showing signs of rust or corrosion, contact Bonfe right away for repairs or replacement.

By following these steps, you’ll be taking proactive measures to prevent sump pump failure and protect your home from water damage.

Some of the most common reasons for sump pump failure include:

• Improper Installation: If not installed properly, your pump may not function efficiently.
• Low-Voltage Extension Cords: Using a low-voltage extension cord can reduce the pump’s effectiveness.
• Incorrect Sizing: If the pump isn’t the right size for your home, it may not be able to handle heavy water levels.
• Lack of Maintenance or Mishandling: Skipping regular maintenance or improper handling can lead to pump failure.

To avoid these issues, always rely on Bonfe for expert installation, maintenance, and repairs.